⚠ This tool does not currently verify Regulatory-Compliant Data Schema Transformation, Cryptographically Anchored Lineage Verification.
PROJECT INPUTS
Runnable deterministic steps: 0 / 3. Enter the project conditions used by this verification workflow. Prefilled values (7/9 inputs) are demonstration inputs, not recommended design values.
Step 1: Perform formal Boolean equivalence verification — Construct truth tables for all atomic signal combinations over domain-relevant ranges (T_surface ∈ [20,200]°C, dT_dt ∈ [0,5] K/s, V_cell/V_initial ∈ [0,1], P_gas ∈ [0,300] kPa) with 0.1-unit discretization. Evaluate L_user and L_norm on each row. Declare equivalence iff outputs match in ≥99.99% of rows (allowing for floating-point tolerance ±1e−6 on thresholds).
Step 2: Resolve channel-to-LIMS-field alignment using ASTM E1447-22 Annex A2 semantics and physical units — Consult ASTM E1447-22 Annex A2 Table A2.1: 'Mandatory Signal Metadata Fields'. Identify required physical quantities: 'surface_temperature' (unit: °C), 'cell_voltage' (unit: V), 'gas_pressure' (unit: kPa), 'temperature_rise_rate' (unit: K/s). Match Arbin channel suffixes ('_T'→temperature, '_V'→voltage, '_P'→pressure, '_dTdt'→derivative) and units to ASTM quantities. Assign CH1_T → surface_temperature, CH2_V → cell_voltage, CH3_P → gas_pressure, CH4_dTdt → temperature_rise_rate. Map each to corresponding LIMS specimen field only if unit-compatible and semantically aligned; otherwise flag as 'unmapped_required_signal'.
Step 3: Compute lossless/lossy compression budget for PDF/A-2b archival reports — Assume rasterized plot area occupies 80% of letter page (612×792 pt); convert to pixels at dpi: (612×dpi/72) × (792×dpi/72). Each channel’s time-series requires f_s × t_test points. Store as 8-bit grayscale raster: bytes = N_ch × f_s × t_test × (dpi/72)^2 × 612 × 792 × 0.8 × 1. Use S_max to solve for max allowable compression ratio R_comp = S_max / (raster_bytes).
Golden Coverage: 0 / 3 steps verified with deterministic test cases.
Step 1: Perform formal Boolean equivalence verification — ○ Not Golden Verified
Step 2: Resolve channel-to-LIMS-field alignment using ASTM E1447-22 Annex A2 semantics and physical units — ○ Not Golden Verified
Step 3: Compute lossless/lossy compression budget for PDF/A-2b archival reports — ○ Not Golden Verified
Step 2 (Resolve channel-to-LIMS-field alignment using ASTM E1447-22 Annex A2 semantics and physical units): No acceptance criterion implemented — result is CALCULATED only.
Step 3 (Compute lossless/lossy compression budget for PDF/A-2b archival reports): No acceptance criterion implemented — result is CALCULATED only.
Regulatory-Compliant Data Schema Transformation: Not implemented.
Cryptographically Anchored Lineage Verification: Not implemented.
SCOPE & LIMITATIONS
NOT CURRENTLY VERIFIED
○ Regulatory-Compliant Data Schema Transformation
○ Cryptographically Anchored Lineage Verification
These capabilities are outside the current verified workflow.
Engineering Verification Summary
HOW THIS VERIFICATION WORKS
Step 1: Perform formal Boolean equivalence verification — compares engineering inputs against deterministic thresholds and produces a PASS or FAIL decision.
Step 2: Resolve channel-to-LIMS-field alignment using ASTM E1447-22 Annex A2 semantics and physical units — engineering workflow step. Follow the documented method for manual execution.
Step 3: Compute lossless/lossy compression budget for PDF/A-2b archival reports — engineering workflow step. Follow the documented method for manual execution.
This tool coordinates 1 validation step and 2 calculation steps. The overall engineering decision uses ALL_REQUIRED_VALIDATION_PASS aggregation: only validation steps contribute to the pass/fail outcome; calculation steps produce data only.
METHODS & EQUATIONS
All formulas are resolved from canonical runtime definitions and executed deterministically by the client-side engine.
Construct truth tables for all atomic signal combinations over domain-relevant ranges (T_surface ∈ [20,200]°C, dT_dt ∈ [0,5] K/s, V_cell/V_initial ∈ [0,1], P_gas ∈ [0,300] kPa) with 0.1-unit discretization. Evaluate L_user and L_norm on each row. Declare equivalence iff outputs match in ≥99.99% of rows (allowing for floating-point tolerance ±1e−6 on thresholds).
Step 2: Resolve channel-to-LIMS-field alignment using ASTM E1447-22 Annex A2 semantics and physical units
Manual Workflow
Consult ASTM E1447-22 Annex A2 Table A2.1: 'Mandatory Signal Metadata Fields'. Identify required physical quantities: 'surface_temperature' (unit: °C), 'cell_voltage' (unit: V), 'gas_pressure' (unit: kPa), 'temperature_rise_rate' (unit: K/s). Match Arbin channel suffixes ('_T'→temperature, '_V'→voltage, '_P'→pressure, '_dTdt'→derivative) and units to ASTM quantities. Assign CH1_T → surface_temperature, CH2_V → cell_voltage, CH3_P → gas_pressure, CH4_dTdt → temperature_rise_rate. Map each to corresponding LIMS specimen field only if unit-compatible and semantically aligned; otherwise flag as 'unmapped_required_signal'.
Step 3: Compute lossless/lossy compression budget for PDF/A-2b archival reports
Manual Workflow
Assume rasterized plot area occupies 80% of letter page (612×792 pt); convert to pixels at dpi: (612×dpi/72) × (792×dpi/72). Each channel’s time-series requires f_s × t_test points. Store as 8-bit grayscale raster: bytes = N_ch × f_s × t_test × (dpi/72)^2 × 612 × 792 × 0.8 × 1. Use S_max to solve for max allowable compression ratio R_comp = S_max / (raster_bytes).
UNDERSTANDING THE RESULTS
PASS
A proven validation criterion passed. The engineering input satisfies the deterministic threshold.
FAIL
A proven validation criterion failed. The engineering input does not satisfy the deterministic threshold.
CALCULATED
A deterministic calculation completed, but no acceptance criterion exists for this step. CALCULATED does NOT mean PASS.
RESULT NOT VALID
Runtime executed but engineering validity requirements were not met.
INCOMPLETE
Required inputs or workflow steps are incomplete.
The overall decision reflects only validation steps. Calculation steps produce numerical results without pass/fail claims.
WHEN TO USE THIS TOOL
When deterministic Battery Nail Penetration Tester engineering verification is needed for project-specific conditions.
For validation of Perform formal Boolean equivalence verification (Step 1).
For calculation of Resolve channel-to-LIMS-field alignment using ASTM E1447-22 Annex A2 semantics and physical units (Step 2).
For calculation of Compute lossless/lossy compression budget for PDF/A-2b archival reports (Step 3).
For deterministic pre-checks before formal engineering review or submission.
When NOT to use this tool: This tool does not replace laboratory testing, formal engineering analysis by a licensed professional, or code-compliance certification. It performs deterministic threshold comparison and calculation only.
ENGINEERING FAQ
What does this verification tool check?
This tool performs 3 deterministic engineering steps: (1) Perform formal Boolean equivalence verification, (2) Resolve channel-to-LIMS-field alignment using ASTM E1447-22 Annex A2 semantics and physical units, (3) Compute lossless/lossy compression budget for PDF/A-2b archival reports.
What does a PASS result mean?
A PASS result means the validation step's deterministic threshold comparison was satisfied. It does not constitute laboratory certification or code compliance.
What does a CALCULATED result mean?
A CALCULATED result means the deterministic calculation completed, but no acceptance criterion is applied to this step. CALCULATED does NOT mean PASS.
What is not currently verified by this workflow?
Capabilities not currently verified include: Regulatory-Compliant Data Schema Transformation, Cryptographically Anchored Lineage Verification.
How many steps are golden verified?
0 out of 3 steps have been verified with deterministic golden test cases.
COMPONENT TOOLS
This workflow currently contains no bound executable Small Tools. Steps are defined by engineering methods and reference materials.
ValidationWorkflow StepValidate logical equivalence between configurable pass/fail rule set and IEC 62660-2:2018 clause 7.3.2 thermal runaway detection criteria
CalculationWorkflow StepMap raw Arbin BT-5HC channel identifiers to LIMS specimen-level metadata schema per ASTM E1447-22 Annex A2
CalculationWorkflow StepDetermine minimum PDF/A-2b compliance margin for digitally signed test reports containing embedded time-series plots
